SAIFERM Lab Spray dryer is contained and supplied complete and ready for immediate operation. All major components are housed within a stainless steel cabinet and the unit can be used on a bench top or with an optional stainless steel stand. The system was designed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .SAIFERM lab spray dryer can be used for organic & water solvents, Model SAIFERM lab low temperature spray dryer can be used for thermo-sensitive materials and high carbohydrate compositions materials. Model SAIFERM lab vacuum spray dryer can be used for probiotics, enzyme and other thermo-sensitive materials. SAIFERM Lab spray freeze dryer is a new freeze dryer method which is faster than traditional freeze dryer. SAIFERM laboratory spray granulator (fluidized bed granulation) can be used for granulation and coating.
Principle
- A menu driven microprocessor controller allows the selection of inlet temperature, airflow, automatic de-blocker frequency and pump speed. The controller features an RS 232 output for connection to a PC or data logger and software allows the control and monitoring of all functions and printing of results.
- The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber. At the same time an integral compressor pumps air into the outer tube of the jet which causes the liquid to emerge as a fine atomised spray into the drying chamber.
- Heated air is blown through the main chamber evaporating the liquid content of the atomised spray. The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle. The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmosphere or to an existing extraction system.
- Two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process . PLC controller, LCD touch panel control fascia with flow path of system. Using proface touchable interface display operation, operator can control temperature, airflow volume, air pressure,pump speed and de-blocker frequency.
- Spray chamber, cyclone separator, receiving tank are all made of Borosilicate glass which can resist strong acid/alk li, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inspected. All the spare parts are easy to install and wash.
- Made of SUS-316 Stainless steel. Easy operating.
- To assure accurate temperature control and easy parameter adjusting
- A filter has been equipped to the inlet unit to prevent the sample from contamination .
- The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.. To make sure the process conducted steady and smoothly, magnetic agitator is optional to make the solution well mixed.
- Narrow size distribution of particles.
- Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled
- The air compressor is no oil and don’t pollute compress air. The power from receiving tank has a good flow. The sound is low than 60db, and following the GMP understands.
- Supplied complete and ready for most spray drying applications.
- Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled.
- Equipped with air filter to remove and collect fine particle s in exhausted air.
- Two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .
- Air inlet temperature range 30ºC to 300ºC
- Air outlet temperature range 30ºC to 140ºC
- Evaporation rate of water at inlet temperature of 250ºC using Standard: Approximately 1500 ml/hour～3000ml/hour
- Max. Sample feed: 2000ml/h
- Min. Sample : 30mL
- To assure accurate temperature control and easy parameter adjusting, YC-015 applies PID. Temp. Precision:±1℃, dry cycle time: 1.0-1.5S
- As standard a touch screen to display temperature, airflow volume, air pressure,pump speed and de-blocker frequency.
- standard with 0.7 mm jet and other sizes are available as accessories
- Power: 3.5KW AC220V
- With cooling device for temperature-sensitive material (optional)
Contact us
lf you have any needs, please fill out the form below and we will contact you as soon as possible.
